COLOROBBIA BRIGHT GOLD 12% LUSTRE - 2 GRAMS

Colorobbia Liquid Metallics are ideal for embellishing porcelain and ceramic objects with eye-catching details. Each 2 gram bottle of liquid overglaze contains dissolved metals that will produce a finish like that of reflective metal. 

NOTE: Images colors may vary from in-person results. Test before final production. Formulation contains precious metals and pricing is subject to change without notice.

Contains solvents: use in a well-ventilated area. Fire only in a kiln with adequate exhaust.

Gold Overglaze Application

1. Note: This product is for use by artists ages 12 and up. Read instructions prior to use.
2. Work in a well-ventilated area when applying to your piece.
3. Do not stir or shake overglaze.
4. Place a small amount of gold overglaze on a glazed palette; apply one smooth coat with a brush designated for use with each respective product.
5. Try to attain an even application of product: Premium Gold tint should be red in color; Bright Gold tint should be brown in color; White Gold tint should be green in color.
6. Do not let overglaze pool in an area; brush out smoothly.
7. Allow to dry.
8. Stilt and fire gold overglaze to cone 018-015.
9. Clean brush in Essence and let dry.

What is a Luster?
Lusters are overglazes. This means they are applied to a surface that has been glaze fired. Lusters take on the texture of the underlying surface that they are applied to (matte, satin, or glossy). Lusters are made with complex combinations of metallic salts, resins and oils. These formulations are designed to effortlessly create amazing metallic and iridescent effects.

Tools
-Use soft bristle round or flat brushes.
-Use disposable paper towels

Handling and safety
Lusters are safe to handle when used with the correct personal protective equipment (PPE). Lusters are flammable and must be keep away from any heated elements or open flames. Always work in a well ventilated area and wear a NIOSH approved respirator. Avoid contact with skin by wearing fitted vinyl gloves. If you happen to get any luster on your clothes or skin, wash with soap and warm water immediately. During firing, avoid breathing fumes and/or kiln exhaust.

Application
Wear appropriate PPE and work in a ventilated area. Your ware and work area should be clean, dry and dust free. If you choose to use rubbing alcohol to clean your ware before application, allow extra drying time as alcohol contains water. To paint, use a small brush that will fit easily inside the diameter of the luster bottle. Dip the point of the soft bristle brush into the luster. The brush bristles should have a “wet” appearance. Lightly swipe any excess luster on the bottle rim. Do not thin luster solution as it can cause streaking and diminish metallic or iridescent effects. We recommend that you experiment with your studio setup before any large scale work is done. Make sure to completely dry your work in a clean area, free from dust, dirt, and moisture.

Clean up and storage
Make sure to wipe the threads on the glass container before capping tightly. Put the glass luster bottle inside the clear plastic container to contain any lingering fumes. To prolong your Lusters, store in a cool/dry place. Hot and humid environments can cause this product to thicken. 

Firing
Fire the fully dried lusters ware to cone 019-018. This should be a fast fire with the peep-holes open. Good firing ventilation is essential for this product.